-
### Description
- Type: Bug
- Priority: Major
According to the [CAN.h](https://github.com/ARMmbed/mbed-os/blob/master/drivers/CAN.h#L141-L142) header file the `read()` method is only supposed to …
-
See https://github.com/PaxInstruments/PaxInstruments-LabWiz-firmware/issues/3
-
Hi Kris, Kevin down in Tasmania. I am playing with a BNO055 (Adafruit unit, with wiring for power and SCL,SDA only) and your BNO_055 Nano Basic AHRS code with a Mega board.
Had some compile issue wh…
-
Hi,
i saw mbed-src have been upgraded to CubeF4 drivers v1.5, which increases HSE timeout from 500 to 5000 ms.
https://github.com/mbedmicro/mbed/blob/master/libraries/mbed/targets/cmsis/TARGET_STM/TAR…
-
I git clone the lastest code of px4, and I use make px4-stm32f4discovery_default upload to flash this test firmware to stm32f4-discovery board. I find out that after bootloader the app will dead , the…
-
The ADC peripheral does not work on the L4, calling pyb.ADC(channel).read() always returns 0.
I've tried to fix it by comparing ST examples, and I've managed to get a bit more life out of it with the…
-
I'm trying to load code on to an STM32L475 (the [EMF TiLDA Mk3 badge](https://badge.emfcamp.org/wiki/TiLDA_MK3)). Debugging seems to work fine, but the "load" command never succeeds. It seems to happe…
-
Hi,
As a way of getting a bit more acquainted with the micropython codebase, I have ported (it compiles, but not yet tested, so there could be more changes needed) micropython to the STM32F767ZIT6 (2…
-
so i try to compile my stuff, which succeeds, then my Arduino IDE wants to upload it to the board, the blue flashing led goes off, and i get an error message
"There was an error during upload with u…
-
Hi Sandeep,
I have designed a couple of development boards using the nRF51 and nRF52; they have been for sale on [Tindie](https://www.tindie.com/products/onehorse/nrf52832-development-board/). Can I …