-
```
What steps will reproduce the problem?
1. Constructor for HW SPI
U8GLIB_SSD1306_128X64_2X display(SS, 9, 14);
vs for SW which works
U8GLIB_SSD1306_128X64_2X display(SLK, MOSI, SS, 9, 14);
What i…
-
```
Attached is a patch to support hardware SPI on the AT90USB1286, tested and
working on the Teensy++ 2.0 board.
The user should define __AT_AT90USB1286__ to enable the changes.
```
Original iss…
-
```
What steps will reproduce the problem?
1. Constructor for HW SPI
U8GLIB_SSD1306_128X64_2X display(SS, 9, 14);
vs for SW which works
U8GLIB_SSD1306_128X64_2X display(SLK, MOSI, SS, 9, 14);
What i…
-
```
What steps will reproduce the problem?
1. Constructor for HW SPI
U8GLIB_SSD1306_128X64_2X display(SS, 9, 14);
vs for SW which works
U8GLIB_SSD1306_128X64_2X display(SLK, MOSI, SS, 9, 14);
What i…
-
```
What steps will reproduce the problem?
1. Constructor for HW SPI
U8GLIB_SSD1306_128X64_2X display(SS, 9, 14);
vs for SW which works
U8GLIB_SSD1306_128X64_2X display(SLK, MOSI, SS, 9, 14);
What i…
-
```
Attached is a patch to support hardware SPI on the AT90USB1286, tested and
working on the Teensy++ 2.0 board.
The user should define __AT_AT90USB1286__ to enable the changes.
```
Original iss…
-
```
What steps will reproduce the problem?
1. Constructor for HW SPI
U8GLIB_SSD1306_128X64_2X display(SS, 9, 14);
vs for SW which works
U8GLIB_SSD1306_128X64_2X display(SLK, MOSI, SS, 9, 14);
What i…
-
Hello, i just start my investigation to make my first teensy synth and I called on your project it seems very good!
Is it possible to use only the teensy .ino to play the synth with a teensy control…
-
I recently received an order from Ray Wu’s Store. I tested the following products:
- WS2812B 16*16pixels led digital flexible panel light
- 4m 60LEDs/m DC5V addressable WS2812B led pixel strip
-…
-
I'm using a variant of the "Stallguard" example to tune the stallguard settings of my TMC 2130 SPI driver (from BigTreeTech), but I am having an SPI issue where the value for drv_status.sg_result retu…