-
The benchmarks seem rather variable since they're based on only a single run currently. I think the numbers would be more reliable if it created a new chart in a loop 50 or 100 times and then took the…
-
A curious observation:
- measuring the 29V current with a high-resolution DMM, I find excellent reproducibility when I enable/disable the channels with the FP button (after enabling/disabling the cu…
-
**Distribution (run `cat /etc/os-release`):**
NAME="Pop!_OS"
VERSION="19.10"
ID=ubuntu
ID_LIKE=debian
PRETTY_NAME="Pop!_OS 19.10"
VERSION_ID="19.10"
HOME_URL="https://system76.com/pop"
…
-
Hi,
I am using Intel i9 9900k in overclocking mode, after I install CoreFreq, I found that the frequency is different it outputs is different from /proc/cpuinfo.
The screenshots on my machine(these …
-
### Description of the enhancement or error report
When running a tensor mechanics problem with debug, the following assertion fails:
Output
```
Time Step 0, time = 0
dt = …
-
I am on an X1 Yoga (3rd generation), installed your package in Arch and still seeing the log messages. Can we get the X1 Yoga supported?
cc @cweagans
-
@gkasprow we have the following observations:
- we had a stabilizer card that had been working fine for a while when powered from the barrel
connector
- removed barrel connector and connected to P…
-
Is anybody else seeing layer shifts on BugFix 2.0.0 ? I'm seeing one or two of them on long prints. I'm seeing them on the X-Axis (and mostly in the negative X direction).
I'm running an IDEX m…
-
1. Rising thermal bubble
2. Deep convection
3. Uniform free convection with wind stress
4. Internal wave
-
I also tested `sys-2-crypt`, `make` worked, wrote `whole.img` to a USB stick. At bootup, it asked for a passphrase, however, the keyboard was dead.
This is on a PC with a UEFI-BIOS HP motherboard, …