-
This is Windows.
Server started in it's own command prompt. Shows "Using device CUDA"
Clent started in a separate command prompt. I press enter for defaults.
Gives this error...
```
Enter the…
-
I tried to flash my Manta M5P because I wanted to use CAN, which i did not setup correctly on the first flash. But after i used DFU Mode and tried to flash (make flash FLASH_DEVICE=0483:df11), this co…
-
Hi,
I use wlink with a WCH-Link dongle.
wlink alone give me : Bus 002 Device 009 ID 1a86:8010(USB-FS 12 Mbps) (RV mode)
but
wlink status give me : Error: USB error: Entity not found Ca…
-
When the device is connected, there is a segfault and it crashes a current window session. It seems like it crashes the entire USB stack actually.
uname -a:
`Linux [hostname] 6.6.8-2-MANJARO #1 SM…
-
Hey, great project!
I have a specific use case - I would need to reverse tether iOS so the device gets its network connection from USB, the main goal is to proxy that connection through socks5 or a…
-
Need to implement periodic checking of hubs to determine if any devices have been plugged/unplugged
-
How can use Verilog/system-Verilog testbench to verify the function of USB device?
-
It'd be great if you could add TCP device support as well as USB/Serial. I've got my Renogy Rover connected via a USB to Serial adaptor, plugged into a Wifi router. This presents itself as a TCP serve…
-
### Description
After installing the driver from here https://coral.ai/docs/accelerator/get-started/#1-install-the-edge-tpu-runtime and re-plugin the tpu into the server (also a restart) the Google C…
-
When compiling with higher warning levels (`-Wall -Wextra -Wunused`) I receive the following warn message (or error message when compiling with `-Werror`
```
Compiling .pio\build\generic_esp32s3_usb…