-
```
What steps will reproduce the problem?
1. In preference, select "Use VPN DNS Server", and fill in the IP of the
VPN DNS server.
2. Connect to the VPN server.
3. After successful connection, resta…
-
```
What steps will reproduce the problem?
1. In preference, select "Use VPN DNS Server", and fill in the IP of the
VPN DNS server.
2. Connect to the VPN server.
3. After successful connection, resta…
-
```
What steps will reproduce the problem?
1. In preference, select "Use VPN DNS Server", and fill in the IP of the
VPN DNS server.
2. Connect to the VPN server.
3. After successful connection, resta…
-
## Overview
Which is the reason for try to have Qt6 for an simple VPN connection. Qt6 it's ok for end users, but not is possible only a CLI like other VPN alternatives, for example NordVPN? I don't k…
-
After about 15 minutes or so after connecting to a Ubiquity gateway VPN I get the following message in the logs and then disconnected from VPN.
```
Mar 7 17:26:13: "L2TP-PSK" #1: ISAKMP SA expire…
-
![Image](https://github.com/HyperPlay-Gaming/hyperplay-desktop-client/assets/38574891/f823663f-1c90-4782-80cf-11247b878e02)
-
* I've used pihole on a raspberry pi on my home network in the past and it was pretty great! I loved seeing the reports on how many ads were blocked.
* We're travelling quite a bit these days, and b…
-
Our present VPN configuration works just fine with Tunnelblick, except for users of macOS Sierra.
It appears that the Rancher DNS nameserver IP address - 169.254.169.250 - is routed differently in …
-
Looks like your code allows proper split vpn setups where certain trafficway gets forced over VPN and other does not.
This is something I need at home for home automation aspects.
I am able to bui…
ghost updated
6 years ago
-
**Affected versions:**
* 2.9.0;
**Tested Platforms:**
* Windows 11;
**Prerequisites:**
* Have Mozilla VPN **2.9 version** installed and opened;
* Have a Fx account with an active subscription for…