-
It became very hard (impossible?) to order supported High Resolution DMD panels from China.
Usually they are using strange chips such as ICN2053 and have only one HUB75 connector, not allowing to dai…
-
A [Waveshare Pico-OLED-2.23](https://www.waveshare.com/wiki/Pico-OLED-2.23) is behaving exactly like a setup suffering from SSD1306/SH1106 confusion: everything appears shifted two columns to the left…
-
Hello,
First, Thank you for all your hard work !
I have a Pi Pico module and Waveshare 2.23" 128x32 SPI/I2C OLED display,
[https://www.waveshare.com/pico-oled-2.23.htm](url)
changing the line …
-
### Board
ESP32 Dev Module
### Device Description
on the SPI bus connected the follows:
1. SD card module
2. OLED 128x32
### Hardware Configuration
use the standard SPI pins connect to OLED an…
-
**Describe the bug**
I'm using https://javl.github.io/image2cpp/ for converting the images into xbm data.
However the data generated cannot be displayed correctly. xbm image is flipped every 8 bit…
-
It seems like there is something not quite right with the config.
I am writing from the Sofle Pico right now, so, working it is!
However, at least for my board, it looks like two keys are swappe…
-
### Describe the problem
Using IDE v2 and a simple example sketch, on trying to enter debug mode the following messages arise:
```text
Waiting for gdb server to start...[2023-08-17T17:08:46.38…
-
Kütüphane ile birlikte gelen "writeTr 128x32_i2c" ve "writeTr 128x64_i2c" örnek dosyalarının adlarında "boşluk" bulunduğundan, Arduino IDE, ASCII olmayan, boşluk içeren veya sayı ile başlayan dosya/kl…
-
Hello. Thank you for this code. I adapted it for the newer Atmega328PB and it is working now. As it has two i2c interfaces.
I have the ssd1306 128x32 oled display. The font size seems to be limited t…
-
Hi,
There does not appear to be a mechanism for submitting a PR for the wiki, so I thought I would just open an issue.
I just wanted to add that this software (3.39) works fine with Yamaha EX5 (…