-
I found a problem with this (and some of the other HX711 libraries), it seems like the library is too fast for the HX711 if the clock speed of the MCU is higher.
It seems that the real speed is act…
lemio updated
5 months ago
-
### Please describe your issue.
`Processing pico (platform: https://github.com/maxgerhardt/platform-raspberrypi/archive/60d6ae81fcc73c34b1493ca9e261695e471bc0c2.zip@1.11.0; board: pico; framework: ar…
-
### Problem description
The energy meter doesn't display any measurements.
### Solution description
It's time for some new quirks
### Screenshots/Video
Screenshots/Video
![image](htt…
-
### Describe the bug
Calib arm flag not cleared when reflashing from configurator - no output observed from gyro
### To Reproduce
Reflash 4.4.0+ from configurator
Load custom defaults for …
-
Hi there,
i have the following problem:
I have an arduino sketch which accept some configuration-details over the serial connection. After applying some configuration, a "reboot" is required. On my …
-
I have a device open and in communication. I also have the hid_enumerate function periodically called. Every once-in-a-while the hid_enumerate function cannot read the manufacturer string or product s…
dsula updated
9 years ago
-
**Is your feature request related to a problem? Please describe.**
Currently it is not possible to use the lptimers of a stm32 as a pwm source.
**Describe the solution you'd like**
Using lptimer…
-
Hello!
Reading the MFRC522 data sheet, it seems like it supports several power-saving modes, including a "soft power-down" mode (http://www.nxp.com/documents/data_sheet/MFRC522.pdf). Is there a way…
-
### Description
I was running two `DS18B20+PAR` temperature sensors without any problems for the last two years on an ESP-01 module running on 3.3V using a 4.7K pullup resistor.
Now, wanting to de…
LeoDJ updated
2 years ago
-
We have been testing the LAN865x driver and we have had problems with RT1064 and RT1170.
Our main focus was NXP RT1064 but we were not able to implement LAN865x and therefore ended up testing it wi…