-
Hello!
When trying to build my project with esp-idf framework with PlatformIO IDE plugin in VSCode, the build fails as shown below:
~~~
> Executing task: platformio run --environment esp32dev <
…
-
Hi Christian
Great project. Thanks for sharing
I don't know if this project is dead or frozen, but it can be very useful to get an modbus error code when something illegal is requested.
After spe…
-
```
Input obj:
String _jsonSensors = {"sensors":[{"sensor":"ds18b20","pin":"4"},...]}
Example:
DynamicJsonBuffer jsonBuffer;
JsonObject& oSENSORS = jsonBuffer.parseObject(_jsonSenso…
-
I've been getting this error when building on VScode in Windows.
If I build the exact same code in Linux (using command line) it just works out fine.
It happens with PIO 5.0.1 and the latest 5.0.2 d…
TD-er updated
2 years ago
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
### Description
The compiling of the OneWire libary with the pre-released ESP32 core version 3.0.0-alpha3 throws an errorwhile compiling the DS18x20_Temperature example.
### Steps To Reprodu…
-
I have an issue with 4.3.1 not detecting DS18B20 on ESP32 board. It will not pull up the sensor on any pin.
- I have tried multiple known good probes.
- Sensor works fine on ESP8266 board with v4.…
-
Thanks for your work sven, i am using your software on one of daniels boards, great stuff!
Previously i was simply cutting power to the whole boiler, and monitored temperatures via DS18B20 sensors. I…
-
### What happened?
In HTTP connector, I assum that is the same problem with Influxdb connection, I need to pass path with parameters. if I add it to rule path it is not adding
### What did you e…
-
Hello,
i have tested your library and i am stuck with one problem. If i use more than four sensors, i no longer get correct values or the first sensor is recognized twice:
> Message (Enter to se…