-
Can we hope that the project will be ported to Arduino environment too?
-
Hello!
I want to try use esp32cam for streaming and timelapse. Timelapse need simple gcode for move effector and on/off triger pin at new layer.
Slicers support macroses on layer change, but its not…
-
When accessing the web interface when the DNN processing takes place, the ESP crashes. Serial log shows:
```
ostename: watermeter2
I (5589) wifi:wifi driver task: 3ffd9c90, prio:23, stack:6656…
-
I am using one of many ESP32-CAM boards. I have a short sketch that takes a picture, uploads the resulting screen shot to a web site, and goes into deep sleep. Before taking the picture, the built-in …
-
**When I try to compile your example, PlatformIO get always this error:**
> Executing task in folder ESP32_CAM_RTSP: pio run <
Processing esp32cam (board: esp32cam; platform: espressif32@>=1.6.0…
-
**I am using PlatformIO v2.2.1 I am trying to set up this project although I am getting some errors, other errors I was able to debug and find a solution, but this elf issue I cannot seem to reso…
-
Instead of using the IP address to fetch the bin id. use the image file name to fetch the bin id.
-
hallo, seit beginn 2021 welches update weiß ich nimmer,
habe ich bei recogintation streifen in den Bildern der fotografierten Zellen ,siehe Bild
seitdem ist die Erkennung leider schlechter geworden …
-
I have seen an issue raised relating to jerky video so not sure whether this is related. I am using a series of static images with short delays between (2 secs) to simulate a door opening. In Blynk …
-
Hi bitbank2,
a long story.....
I wrote an optimized library for oled SSD1331 (96x64 16Bit color oled), then ported it to SSD1351 (128x128 16Bit color oled) and even some time ago I started to po…