-
It seems that setlong() function work for some LC475 and crashes at others, manly if Frequency was changed to 33Mhz by resistor swap.
-
Hi,
We need to use qrtone outside, where low frequency messages would travel much farther away.
Would it be possible to configure qrtone to transmit over the lower range of the audible spectrum…
-
Hi everyone, I've read on the online guide that the control loops are able to run at frequencies like 1Khz.
Working in SITL i noticed that the default loop frequency for example for the Rate controll…
-
For full Doppler tuning on amateur radio transponder satellites, a calibration feature is needed to apply an offset to the calculated Doppler shift on the uplink, downlink, or both. This is required d…
-
Hi,
I am running accelsearch within a frequency range of 0.01 to 6.8 Hz by restricting -flo and -fhi. However, it is searching between 0.0 to 6.8 Hz! I am using -numharm 1, so it should search with…
-
```md
![GitHub commit activity](https://img.shields.io/github/commit-activity/m/michaelcurrin/code-cookbook)
```
![GitHub commit activity](https://img.shields.io/github/commit-activity/y/michaelcur…
-
Manca
A suitable value for the sampling rate is 0.2 samples/second , and a suitable value for Duration is 6000 seconds.
Perchè non hai usato i testi suggeriti nel mio file Halldata acquisitio.d…
-
Hi,
I encountered an issue when plotting frequency:
`Error in data.frame(..., check.names = FALSE) :
arguments imply differing number of rows: 605, 633`
`In addition: Warning message:
In…
-
Yes I know enforcement is low, but if I build a dedicated and easily accessible node for me and my cohorts, it will be pretty easy to find my node if someone complains. Is there something in the ISM f…
-
data: duration in hours
num of groups: 7
group1:
| max of every group | frequency |
| --- | --- |
| 190 | 23 |
| 380 | 6 |
| 570 | 2 |
| 760 | 1 |
| 950 | 2 |
| 1140 | 8 |
| 1330 | 4 |
group6
| ma…