-
After 1/07/2023 Universal analytics will not work anymore.
https://support.google.com/analytics/answer/10759417?ref_topic=10737980?utm_campaign%3D2022-q1-gbl-all-gafree&utm_source=google-growth&utm_m…
-
command output:
pcb2gcode--back="/home/user/Downloads/Easy-SDR-master/HF Upconverter/SMD/Gerbers/Gerber_BottomLayer.GBL" --drill="/home/user/Downloads/Easy-SDR-master/HF Upconverter/SMD/Gerbers/Gerbe…
-
When validating a pds4.folder of image type arrays, several errors were generated during the evaluation of the min/max array values. Some were correct, others were not.
ERROR [error.array.value_o…
-
An "iteration" of alignment consists of four steps.
1. `construct` a detector from a compact.xml with the defined alignment parameters
2. rerun `tracking` and the GBL alignment driver with hps-java …
-
### The problem
I am unable to update the firmware on any of my Zooz devices (e.g. Zen17 relay). The update progresses between 6-20% and then fails.
I'm using a Pi4 with HAOS and a Zooz USB stick…
-
While running regression tests on typedefed enums on cppyy v2.4.2 built from source, I was running into the following error when the line
```python
import cppyy
cppyy.cppdef("""\
…
-
Harmony OS 2.0.0
Huawei matepad DBY-W09
2023.1.1-full (and in all previous)
I have a tablet hanging as a home control. The tablet is running homeassistant. And about once a day the application cr…
-
in C++
void cpp_func(void *d);
python_lambda = a: a*a
cppyy.gbl.cpp_func(python_lambda)
Can give me any advice on how I should do this? Thanks!
-
### Describe the issue you are experiencing
Addon is not starting due rcp failure.
### What type of installation are you running?
Home Assistant OS
### Which operating system are you running on?
…
-
Hello, i have a problem flashing firmware using the latest release.
Error message: `Failed to update firmware: The controller is not in bootloader mode! (ZW0103)`
Hardware: Raspberry Pi 3,
```
…