-
Controller side - I've updated the firmare to the **CNC_xPRO_V5_XYYZ_485_NO.bin** firmware following th instructions in the wiki, but when i try to issue the command **$Spindle/Type=HUANYANG // RS485*…
-
**Versions**
- Candle version: 1.22.15b
- Firmware version: 1.1h
- Windows 11
when i press the home icon. The z axis moves downward about 10mm (step size in jog command), and the status chang…
-
I have succsessfully compiled grblHAL for the SKR2 Board. But after saving parameters the bootloader is overwritten. This is because the board has a 32k bootloader and uses the address 0x8004000 which…
-
### Version
2.0.14
### Hardware / Firmware
GRBL 1.1
### What happened
I am using UGS on a macbook air M2 with macOS Ventura 13.0.1. I uploaded the Grbl 1.1 firmware onto my Arduino Uno.…
-
Hi @terjeio ,
Just wanted to share my initial impressions after playing some time on webui, ftp and sd.
1. FTP works like a charm
2. Uploading/deleting files from sd via webui and ftp both works perfe…
-
I need to change the uart of esp32 to send control signals from uart0 to uart2(GPIO 16,17)
-
### Version
2.0.17
### Hardware / Firmware
GRBL 1.1
### What happened
*** Connecting to tcp://192.168.178.25:23
>>> ?
ok
>>> $I
[VER:1.1f backlash.20192303.Mega:]
[OPT:VNM+,35,255]
ok
>>> …
-
### Version
2.0.20
### Hardware / Firmware
GRBL 1.1
### What happened
Trying to open an project file getting the following error...
java.lang.NullPointerException
at org.netbeans.modules.e…
-
Hello friends,
I have an issue with CNCjs, that it moves less than the real and smaller , I mean the final result of my project after been cut is smaller than the drawing. Can you advise please.
T…
-
ioSender 2.0.42, PR2040 recent build. I think this is an ioSender problem but could be RP2040 related.
Initially after starting ioSender XL, I can issue GCode commands via MDI with no problem. If …