-
When sending download command in serial tab, the client crashes.
Since it waits for xmodem download and thats not supported yet.
-
## Description
People aren't reading instructions about how to use PM3. They have old firmwares, or Iceman's firmware on there.
We should tell them to stop doing this, until we sort out things …
-
Needed pull requests (done):
- https://github.com/Proxmark/proxmark3/pull/506 (merged)
- ~https://github.com/Proxmark/proxmark3/pull/463~ (replaced)
- ~https://github.com/Proxmark/proxmark3/pull/…
-
**Describe the bug**
EM Marine card read is broken after last commits.
**Without card attached:**
pm3 --> lf em 410x_read
LF Signal properties:
high..........15
low....…
-
I installed the latest release of AndProx (2.0.4) on a Xiaomi Redmi Note 4 MTK (nikel) with Android version 6.0.
I flashed the corresponding fullimage to my PM3 RDV2.0.
I connected the pm3 to the Xi…
-
Hi guys,
Latest iceman FW and client on an RDV2 - hardnested crashes the client on the second attempt. Throwing:
Segmentation fault: 11
Strangely this is not happening with a proxmark3 easy o…
-
- **OS and version used:** MIPS Linux OpenWrt 3.18.29
- **SDK version used:** IoT Hub SDK for C, version 1.2.9 (2018-09-11)
# Description of the issue:
After device startup, Wi-Fi is …
-
Hello,
Apologies if this is a bad Question, does anyone know if this build would work with the ELECHOUSE Proxmark3 V2?
I want a more portable PM3, but with Iceman's build.
It's running a AT91…
-
Okay, this is a bit of a harder issue to describe, and I've been trying to figure out a good way to document it before I opened this issue, but have been unsuccessful so far. Perhaps I can borrow a U…
-
```
{"sim", CmdHF15Sim, 0, "Fake an ISO15693 tag"},
```
But
```
// Simulation is still not working very good
int CmdHF15Sim(const char *Cmd)
{
UsbCommand c = {CMD_SIMTAG_ISO_15693, {strtol(…
mubix updated
5 years ago