-
Hello, I tried to connect our board to the ESP32 development board, and there was an error when loading the driver.
The following is the diagram of the hardware connection. We connected seven signa…
-
The next big thing is to build some open hardware sensors for pimatic.
The Quest is to build a hardware 433mhz sender based on arduino or a ATtiny AVRs that collects environment data like light inte…
-
I've been pulling my hair out trying to get the container version of this from dockerhub to work. I have it running just fine on bare metal though the container version would be better. I assume it…
-
When I execute hcitool lescan I can see the MOVE2 which i'm assuming is my MOVE device. (I have noticed it is not CSRMESH like others have seen)
![image](https://user-images.githubusercontent.com/930…
-
### Problem description
I have a frustrating issue with this power plug. The first lot of 5 that I installed worked great and the power measurement sensors work accurately and consitently
So 2 w…
-
### The problem
I am converting all my ESP nodes from Arduino to ESP-IDF and ran into an unexpected issue with the SHT3xD sensor. The issue is present on all my nodes that use that sensor and acros…
-
### Problem description
Hello,
I bought [garage opener](https://www.aliexpress.com/item/1005005408244662.html?spm=a2g0o.order_list.order_list_main.17.5f821802XHOvjP) and it was not recognized by …
-
Hi,
I have a ESP32 Heltec V2 Lora board. I use this ttn-esp32 firmware pack. I try to send a sensor data to the chirpstack Lorawan system, but I have a problem.
The Joining to the chirpstack sys…
-
So the current reception architecture was created back in 2014 when I was working on a very, very early proof-of-concept (the protocol was first announced in 2014). A lot of ground-breaking changes we…
-
Hi,
i have found another issue, not sure if its the code, but I have the following problem:
I have now implemented the meter in home assistant and added it to the energy dashboard.
The problem no…