-
### Issue details
I'm running mavros on my computer and connecting to the pixhawk using telemetry, all ports are set correctly, however all the mavros topics seem to be empty, the only one that had…
-
- [x] Warning: src/main/common/gps_conversion.c: line 35, columns 13-20, Warning - `degress` is not a recognized word. (unrecognized-spelling)
- [x] Warning: src/main/common/printf.h: line 87, column…
-
**Issue details**
_Please describe the problem_
since this cubes uses here3 GPS, CAN bus is enabled. with that hereflow is also connected and it work perfectly.
due to that, i2c bus is not worki…
-
As discussed on this wiki PR: https://github.com/ArduPilot/ardupilot_wiki/pull/2487 users of the Benewake TFMini I2C lidar must specifically set the RNGFNDx_ADDR parameter to 16. We should avoid the …
-
Now that rover firmware can read water depth it really needs a way of avoiding shallow water and running aground, the simplest way of doing this would be an altitude fence so its triggered if sonar de…
-
Hi
I'm trying to build electronic equipment indoors.
Omnibus F4 Pro 1
Servos 2
ESC 1
sbus Receiver 1
How to set up the main motor to rotate without a gps r…
-
The [Copter flight mode summary page](https://ardupilot.org/copter/docs/flight-modes.html) has a "GPS" column and a "GPS Dependency" section and I've found at least one user who took this literally an…
-
### Issue details
Problem: Mavlink Connection through router doesn't work/only works. Especially the `mavros/battery` topic doesn't seem to get published, even though a lot of other information is.
…
-
webots should run slow. start the world below (it must run), right click on robot "show robot window", "override controller" and "enable all" to turn on the RangeFinder with an very high resolution of…
-
Rush Blade F7
```
dump
###WARNING: NO CUSTOM DEFAULTS FOUND###
# version
# Betaflight / STM32F7X2 (S7X2) 4.2.4 Oct 20 2020 / 08:20:06 (fbcaf8c50) MSP API: 1.43
###ERROR: dump: NO CONFIG FOUN…