-
I compiled lildebi on a debian, installed the apk on my phone and tried to install debian. But wget is telling me wget: bad address "http://mirrors.ece.ubc.ca/debian".
I had to move the included wget…
-
```
I have compiled the boblightd for my dreambox.
See the attachement.
I i run boblightd i see only:
/dev/ttyUSB0 write: 41 64 61 00 31 64 ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff f…
-
```
I have compiled the boblightd for my dreambox.
See the attachement.
I i run boblightd i see only:
/dev/ttyUSB0 write: 41 64 61 00 31 64 ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff f…
-
```
I have compiled the boblightd for my dreambox.
See the attachement.
I i run boblightd i see only:
/dev/ttyUSB0 write: 41 64 61 00 31 64 ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff f…
-
```
I have compiled the boblightd for my dreambox.
See the attachement.
I i run boblightd i see only:
/dev/ttyUSB0 write: 41 64 61 00 31 64 ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff f…
-
The alsa stack seemed stable the last months and years til last week.
Artix Linux here, I upgraded from Linux 6.7-rt to 6.10-rt and now it seems, the Duet2 Firewire is not discovered allways by apla…
-
Context:
- robot: KR 210
- controller: KR C4 (v8.3.22)
- RSI: 3.3
- afaict payload is configured correctly
- controller in T2
Set up `kuka_rsi_hw_interface` and the controller as I've d…
-
We have ARM and ARM64 (#1305) arriving on RPi3B+ and LePotato boards. We should try and see if we can get GPU acceleration there:
- OpenCL can work not too bad on Intel GPUs (cf `ccpp`) using Comput…
-
Please set CONFIG_AK8975=m
Tested with:
* https://gist.github.com/jadonk/99288dd94fb16b6c764c7c81c7735dd0
* https://gist.github.com/jadonk/bcc5f1e65f39406800c3c32cb81290b1
```
debian@beaglebo…
-
I have used beaglebone-black-make-microSD-flasher-from-eMMC.sh for quite some time and I have just come to update an image I was using.
I updated to the latest scripts in this repo and managed to c…