-
Da ich gelesen habe, das die RGB LED über GPIO angesteuert wird, hätte ich den "Verbesserungsvorschläge-Vorschlag" den Status dieser LED im WEB UI ebenfalls abzubilden.
Bei mir hängt die CCU an einer…
-
I installed the pivccu3 image (Raspbian_Stretch_Lite_piVCCU3_2018-11-19.zip) successfully on my Raspberry 2, applying the HM-MOD-RPI-PCB as the RF modem.
I also have another very simple bash script…
-
RapsberryPi3 B+ and RPI-RF-MOD
RaspberryMatic 3.41.11.20181126
HMIP-PSM original firmware 2.2.2
After the teach-in, a message about the software update appeared. Duty cycle peptide remained unch…
Erbit updated
5 years ago
-
HM-MOD-RPI-PCB supports hmip. Yet, if I enable the option for hmip_enable and set device to /dev/ttyAMA0, the add-on won't start. It says that /dev/ttyAMA0 can't be opened. In RF mode, everything runs…
-
Hello,
I have a PI3 with a HM-MOD-RPI-PCB and newest RaspberryMatic 2.31.25.20180225.
When I open : "http://192.168.xxx.xxx/tools/devconfig.cgi?cmd=show_rssi&sid=@xxxxxxxx@" and click on RSSI on…
-
Das `elseif()` funktioniert nicht innerhalb einer `while()` Schleife. Die Schleife wird nach dem 1. elseif abgebrochen. Ob auch `foreach()` betroffen ist, habe ich nicht überprüft.
Skript zum Nach…
-
On an Orange PI+ with Armbian Ubuntu 18.04.1 4.14.84-sunxi I installed both pivccu-devicetree-armbian and pivccu-modules-dkms. The corresponding modules are loaded successfully:
```
root@pi2:~# lsmo…
-
We've found a new release from Edimax. It's versioned 5.3.4.
* 8814au 5ghz got issues, while for 8812/8821 it's working.
* 8814au VHT got issues, report in below comment
* Cannot set channel with…
-
**Describe the bug and the tests done **
The Raspberrymatic was no more working. So I did a reboot.
As no connection was possible, connected a monitor to the raspberrymatic.
It showed the error m…
-
Nach Update auf 3.41.11.20181126 werden unter "Status und Bedienung -> Geräte" nicht alle Geräte angezeigt. Es fehlen z.B. alle Heizkörperthermostate HM-CC-RT-DN und HM-LC-Sw2-FM.
Seltsamerweise werd…