-
The Matek M10Q-5883 connected to the G747-HELI provides both GPS and magnetometer/compass (via the QMC5883L).
The problem is that once the magnetometer is enabled (yes, it works!) it interferes with …
-
Hej Urs,
thanks for your code.
I am testing a very similar setup at the moment with an ESP32, SDS011 and the DHT22.
While DHT22 works fine with the DHT library for the ESP32 and we were successful …
-
This paper is currently being written in the [BitBucket/3dperceptionlab/paper_tactilegcn2018](https://bitbucket.org/3dpl/paper_tactilegcn2018/src) repository. The following tasks must be completed:
…
-
Good day, I have been looking for a library that works well with my ASAIR DHT20 sensor for a while now, and so far, your library is the only promising thing I have seen to date. However, whenever I ru…
-
I use a 60s/U bolus rate, so a 10U bolus takes about 10 minutes. This morning I replaced my Libre2 sensor and was waiting the 60 min sensor statup. After 30min, AAPS alarms due to missed BG readings…
-
Background:
When working with analog signals, these signals often correspond to a measurement (e.g. sensor) or other physical setting (e.g. speed, angle, temperature, ...). Most of the time the relati…
-
### Feedback
If it were possible to incorporate an option interpolation: [True/False], which ensures that gaps are closed that can arise from a temporary failure. The integration from the last existi…
-
For general questions please use [PX4 Discuss](http://discuss.px4.io/) or Slack (you can find an invite link on this project README).
**Describe problem solved by the proposed feature**
I am using…
-
At the moment you can log data only continously for all sensors in a rotating CSV file or in an Influxdb. To create sensor logs for later review and control it would be nice to a widget on the dashboa…
-
# Phone
- [x] Add AccelerometerWorker, GyroscopeWorker, MagnetometerWorker, CompassWorker functions to the Phone
- [x] Add a test page(SpideySensors) that will display X,Y,Z values to the views fold…