-
Firmware version:
3.4.0 final
Tested:
Provided Gcodes for the MMU v2.0
Filaments used:
Prusa / fillamentum filaments
I have tested several times the provided Gcodes and have recognized sev…
-
### Checklist
- [x] I checked for similar existing issues (both open and closed) before posting.
- [x] I am running the latest version.
### Expected behavior
I have a schedule scheme to cont…
-
## Information about the device + link
Tuya Smart Life ZigBee Wireless Wall Switch 3 Gangs Remote
Model No. SS9300ZB
https://aliexpress.ru/item/1005001942130676.html
https://www.loratap.com
#…
-
### Is your problem within Home Assistant (Core or Z-Wave JS Integration)?
YES, BUT a Home Assistant developer has told me to come here
### Is your problem within ZWaveJS2MQTT?
YES, BUT a ZWa…
-
**Describe the bug**
Using 0.4.0 firmware, a newly purchased Mobula6 Frsky returns `NO_GYRO` under Setup > Arming Disable Flags and will not arm. The device was purchased on 3/Apr/2022 and now comes …
-
Any solution for this problem below?
after `G29` `#define Z_PROBE_END_SCRIPT` `m402` not working
``` cpp
15:29:41.580 : echo:Unknown command: "m402"
```
-
### The problem
I have 4 thermostats, and all of them not only report incorrect temperature but also do not allow to change the operation mode from HASS. The operation mode is always `off`, and the t…
-
The TH213 is used to control the electric floor heating.
![image](https://user-images.githubusercontent.com/53995991/132989176-7eccbda8-f0f1-41b2-af74-0c8fa6be768d.png)
Using the localtuya integra…
-
Thank you for this amazing repo. I wanted to share my "No response received" error with you, but I'm not sure if it is code or hardware to be honest.
**My Hardware**
I have a [Pioneer WYS024GMF…
-
## The problem
The deCONZ addon seems to randomly stop itself without warning. It can be started again normally and work just fine, but then will stop again some indeterminate time later. It's ha…