-
Dear community,
I'm currently experimenting with the EVK-SARA-R510S, EVK-SARA-R510M8S and thingstream.
So far I'm able to send messages via m-center, but for my future projects I'd like to use the u…
-
### Subject of the issue
I have a custom circuit with a SARA R500S module and an Atmega32u4 processor.
The code compiles well and uploads correctly to the processor, but in the Serial monitor, at th…
-
I'm following _section 3.2.3_ of the [EVK-NORA-B1 User Guide](https://content.u-blox.com/sites/default/files/EVK-NORA-B1_UserGuide_UBX-20030319.pdf). I have 2 EVK-NORA-B126 boards that I'm trying to p…
-
The u-blox [MAX-M10S](https://www.u-blox.com/en/product/max-m10-series) is now shipping for production.
This module is similar to the MAX-M8Q but includes support for:
* All 4 GNSS consitlations a…
-
## Feature request
In order to support the ROS2 [NavSatFix](https://docs.ros2.org/galactic/api/sensor_msgs/msg/NavSatFix.html) message, which Ardupilot can publish over DDS, the covariance field for …
-
since recently the Raspberry Pi Pico W received Bluetooth support and using the arduino-pico Arduino RP2040 core uses btstack (maybe even the Pico SDK uses it, I'm not sure)
I started porting a wor…
-
微博内容精选
-
Ciao
I have a GL.iNet GL-X750 with (openwrt-19.07 branch (git-21.189.23240-7b931da) / OpenWrt 19.07.8 r11364-ef56c85848)
I try to install luci-app-gpoint_2.0.0_all.ipk but I have a problem
Installi…
-
Hi,
After I have replaced the module I did a complete refresh on CM4 all ok so far.
But now the /dev/ttyAMA0 is not visible anymore, instead is serial0 or /dev/ttyS0. Is that an issue if I leave…
-
I am using WiFi.getTime() to replace my NTP access/parsing code. I noticed that the returned timestamp is exactly 2 days in the past. Simply adding the missing 172800 seconds fixes the problem but of …