-
**_Reported by Gustavo Lima Chaves:_**
One more of our evidences that the 6LOWPAN fragmentation code in Zephyr seems broken is due to the way said stack was adapted to work with multiple network buff…
-
Hi,
I had connected 3 ARM devices with 1 ARM as DUT(Leader Role).
**Harness version** - Thread Test Harness V1.1 Beta v1.0
**Reference devices and their firmware**: ARM :( NXP FRDM-K64F with Firef…
-
**_Reported by Andrei Laperie:_**
Routing node support (available in Contiki) needs to be validated/enabled for current zephyr stack
(Imported from Jira ZEP-628)
-
I'm opening this issue in continuity of this one where we identified the source of the probleme : https://github.com/ARMmbed/mbed-os/issues/4246
The problem is detailled in the last comments, start…
-
I found the default address (ff03::1) is not for multicast. but the address (ff02::1) works well for multicast.
When making a socket with ff03::1, message could be sent for each button press, but no …
-
This issue lists the status of all tests for the [Release Candidate 2 of the 2017.10](https://github.com/RIOT-OS/RIOT/releases/tag/2017.10-RC2) release.
**NOTE**
[Please report all findings to thi…
-
**_Reported by Andrei Laperie:_**
Routing node support (available in Contiki) needs to be validated/enabled for current zephyr stack
(Imported from Jira ZEP-628)
-
We are not able to ping global IPv6 addresses from a mesh network.
Our system setup is as follows:
- a mbed 6LoWPAN Border Router HAT connected to mbed-access-point
- mbed-access-point (using pre-co…
-
NUCLEO_F401RE/411RE failed to read/write SPI registers to Atmel RF233 shield when LED is using. because SPI1_SCK and LED are using the same pin D13, which is required by the 6LowPAN RF233 shield. for …
-
**_Reported by Dawei Wu:_**
*Details:*
Both A101 and quark se board have this issue.
serial console output on A101:
```
shell> Run IPSP sample[bt] [WRN] set_static_addr: Using temporary static ra…