-
Hello!
I have an big issue with my LED setup. I have an RPI3, an Adafruit LED Hat and four HUB75 16x32 Panels. I have connected these four panels in a chain. I had compiled the led-matrix library wit…
-
I recently acquired 18 RGB 32x64 panels for a video project at school. The supplier claims to be the HUB75 standard.
The pin layout is as pictured. Twice the pin R1 is specified. Also no line D. Four…
-
It would be nice if 'Monotron' was an application you could run on different boards (see #12). @IGBC also wanted to port it to a board with an FPGA based GPU. This is the classic M-N problem.
Bad s…
-
I had not used my RaspberryPi with a PiJuice hat for over a month. I plugged in power directly to the PiJuice's microUSB socket (an Adafruit adapter) but even after continuously charging for several …
-
Hi, first thanks for the detailed instructions for such a cool microscope! We´ve managed to build one, using the PCB version 0.6 and the 2nd version of 3D-printed parts (some photos attached). It wor…
-
Hi there,
I've been using your package and its works wonderfully. I've been building a Tetris game using it, see: https://github.com/bradcornford/Rgb-Matrix-Tetris. I'm currently using a 32x64 pan…
-
Hi, i tried to compile this driver with gcc 6.4.0 and it throws this error:
```
/var/tmp/portage/sci-libs/indilib-driver-amh-9999/work/indilib-driver-amh-9999/amh_focuser.cpp: In member function ‘vi…
-
Hi, i´ve tried to install the Pijuice numerous times with little success (at least 5-6+ times). This is my setup:
HW: Raspberry Pi 3B+
OS: Tried latest Raspbian Buster, Kali, Arch Linux
Problem…
-
Hi Mr Zeller
I have a 32x64 led matrix and even after resizing and converting the fonts using otf2bdf, i can't seen to get it to display corectly I was wondering how can I fix this since i have tri…
-
Board: Raspberry Pi 4
OS: Linux raspberrypi 4.19.58-v7l+
Panels: Chinese 2727 SMD 64x32 5 pitch
Hello !
I am driving 4 panels using 2 chains.
I have the following "display" function in a whil…