-
I wonder if the message bus used in production at MADE is different from the one described in the book in ways which make it more reliable. In the scenario of a batch quanity change deallocating a num…
-
I notice wire.pins() is marked deprecated.
Please consider, I did not see an explanation for reasoning, maybe I missed it.
A lot of libraries have a Wire.begin() inside their own `begin()` or in…
-
When using the GenericStorage with an investment optimization approach like this:
```
electric_storage = cmp.GenericStorage(
label="electric_storage",
inputs={el_bus: solph…
-
How do I change the I2C bus address of a ATTiny85 Digispark dongle, if I would like to use multiple of them on the same Raspberry Pi4? (Or with a USB HUB.)
I guess I have to re-compile the firmware…
-
This is the feature that is present in the "public transport" addon, and would be really, **REALLY** useful if we could have it support the PTv2 schema. Currently, the "public transport" addon needs "…
-
## Introduction
These changes are aimed at improving ISO-TP in the following areas:
- Add CAN-FD support
- Fix existing bugs/limitations
- Reduce resource usage when communicating with a large…
-
제가 기본 지식이 너무 부족하여 이 글과 한글로 된 글을 읽고 연습하고 있는데 너무 안되네요.
동영상도 두 번이나 반복해서 보고 이 글과 한글로 된 글도 읽었지만 제겐 너무나 어렵습니다.
우선 제가 한건 앵커브리핑에서 손석희 앵커목소리를 다섯시간 이상 분량을 따와서 mp3로 만들고 데이터셋에 오디오방에 넣어 놓았습니다. jason은 제가 어떻게 만드…
-
- [ ] Is there a way to make a "thank you page" after someone fills out the RSVP?
- [ ] Should we make a new section between "ceremony" and "things to do"? Called something like "Event Details" or som…
kledu updated
10 years ago
-
Hi. I have a working custom RPI CM4 board. CB1 module (v2.2) after power on eats 120ma from 5V bus and it looks like it can't start. RX/TX shows nothing, hdmi/ethernet nothing. I tried to set usb boot…
-
**Reported by manuelbi on 2008-11-27 22:55 UTC**
Quite some Sony machines have hardware pause. Examples are the Sony HB-201P, HB-101P, and some more
The service manual of the 101/201 explains how it …