-
I don't want to rush anyone into anything, I'm just wondering if it would eventually be possible to add a start/stop charging entity for more automation ideas.
-
John Voltz
Mon 21 Aug 2006 12:05:01 PM UTC
This is a feature request rather than a bug.
AVRDUDE currently does not support RC oscillator calibration as outlined in the AVR053 appnote.
[file #10564…
-
Printer type : MK3S with MMU2S
Printer firmware version : 3.9.0
MMU Upgrade : MMU2S
MMU upgrade firmware version : 1.0.6
SD card or USB/Octoprint : N/A
Describe the bug :
After firmware fl…
-
I have a new attiny404 which I've tried programming with both a HV UPDI programmer and a DIY/arduino version, but both encounter the same error message: `avrdude error: bad response to read memory com…
-
i flashed 3.3.0 via slic3r 1.40.1+ to my MK3 but that resulted in first mismatch at byte 0x3c001
0x00 != 0x06
`
avrdude: Version 6.3-20160220-prusa3d, compiled on Jul 5 2018 at 06:36:…
-
## Hi Gary !
I have some very strange observation then sleeping end device is direct connected to one coordinator and is pulling its parent (the coordinator) or trying sending one attribute report …
-
-
Could you please explain how to program the programming interface? I am a little confused as to what the arduino code start9_programming_interface.ino and the flash_composer are meant to do. Also, how…
-
Hi, I'd like to work with some Arduino Nano that seems to have a "new" bootloader: on previous projects, working in C++ with PlatformIO, the actual board that I have to select is [nanoatmega328new](ht…
-
### Describe the Bug
QMK Firmware 0.14.16 …