-
```
How to NAND flash rootfs.jffs2 file system?
Is there any procedure to NAND flash for android?
What are the new partitions and offsets of NAND partition?
What are the load addresses that i have …
-
Ok, so I applied the patch to the correct u-boot repositry tag, modified some configuration parameters to force u-boot get into fastboot mode, and built for sun6i hardware successfully.
The result of …
-
```
How to NAND flash rootfs.jffs2 file system?
Is there any procedure to NAND flash for android?
What are the new partitions and offsets of NAND partition?
What are the load addresses that i have …
-
```
Hi, May I know if the firmware
"openwrt-ar71xx-generic-tl-mr3040-v2-squashfs-factory.bin " is compatible with
the TL-M3040 V2.2?
Thank you.
```
Original issue reported on code.google.com by `z…
-
```
Hi, May I know if the firmware
"openwrt-ar71xx-generic-tl-mr3040-v2-squashfs-factory.bin " is compatible with
the TL-M3040 V2.2?
Thank you.
```
Original issue reported on code.google.com by `z…
-
```
How to NAND flash rootfs.jffs2 file system?
Is there any procedure to NAND flash for android?
What are the new partitions and offsets of NAND partition?
What are the load addresses that i have …
-
**Describe the solution you'd like**
FormationFlight should be able to be passthrough flashed in the same way as ExpressLRS. We should support a return to bootloader command, and should have automatio…
-
Hi @juvinski,
Do you have any instructions on how I can compile this firmware on linux?
And then how to flash it to the STM board (what hardware do I need to connect my laptop to the STM board…
-
Hi!
I'm getting `CMakeLists.txt not found in project directory c:\users\username\downloads\zbs_flasher-main\zbs_flasher-main\esp32_flasher` when trying to flash the ESP using Visual Studio code.
…
-
Using BLHeliSuite32 32.9.0.3 or above, attempting to flash gives an error - "Checked Verify function: FAILED"
Not sure what to make of it, as the verify function is in fact there (albeit just retur…