-
**Description**
The Index provides a higher score for more frequent publication.
**2013 Index test**
In 2013, the maximum score for each indicator was:
- 100% if overall publication was **at least qu…
-
Some habits I want to form are daily, but some are only weekly, or a few times a week. It would be good to get positive reinforcement for achieving those goals.
-
Cool project!
This may just be my low quality microphone, but the app often shows the frequency an octave above the note I'm actually hitting. This occurs mostly on the A and lower E strings.. Is the…
-
ricordarsi
This table is intended to represent schedules that don't have a fixed list of stop times. When trips are defined in frequencies.txt, the trip planner ignores the absolute values of the ar…
-
Hi! I have a 64 progress bars. How can i assign each of them a frequency to make the analysis of my audio file? Then i want to get volume current khz!
P.S. What about offline analyze? I need analyz…
-
Hi Armand,
Great toolbox and paper- thanks for putting this out for us all!
I hope I didn't missing something in the documentation, but I was wondering how to set up your scripts to conduct TF…
-
Hi,
We need to use qrtone outside, where low frequency messages would travel much farther away.
Would it be possible to configure qrtone to transmit over the lower range of the audible spectrum…
-
It is no longer enough to just sort notes by 2.4 GHz 5 GHz 3 GHz but more resolution. The request is for the map to display, nodes grouped by the RF links, sort display by channel frequency, for each …
-
Hi everyone, I've read on the online guide that the control loops are able to run at frequencies like 1Khz.
Working in SITL i noticed that the default loop frequency for example for the Rate controll…
-
For full Doppler tuning on amateur radio transponder satellites, a calibration feature is needed to apply an offset to the calculated Doppler shift on the uplink, downlink, or both. This is required d…