-
I have an ESP8622 D1 mini lite (nodeMCU) and successfully set up a Wi-Fi stream radio with this great library.
However, after I connected an OLED screen (hardware 4 Wire SPI), using the u8g2 librar…
-
### System information:
- I am using: LEGO MINDSTORMS EV3
- I installed ev3dev using this image file: ev3-ev3dev-jessie-2015-12-30.img
- My kernel version is: 4.4.9-11-ev3dev-ev3
- My host computer i…
-
This is a very nice project, and I was wondering if anyone has developed the 'FAST' mode DRO.
My plan is to use this DRO as a closed-loop system to drive spindles at a determined speed, the feedback …
-
### Describe the bug
Hello,
I recently got a hyperpixel display (the rectangle one) and I noticed that if I look really close or be in icons that contain a lot of gray like the file explorer in da…
-
When starting `pijuice_cli` I get "No PiJuice found or Failed to use I2C bus"
When running `python3 /usr/bin/pijuice_cli.py` the CLI starts but if I go into Status it crashes:
```
Traceback (mo…
-
A few times a day the keyboard becomes unresponsive or a key gets stuck. Unplugging and plugging back in the usb usually fixes it. Working off my configuration here: https://github.com/postelrich/ergo…
-
Using the STM32WB55, using I2C (especially using it frequently/intensively) will disconnect BLE devices, and sometimes even crash the whole microcontroller. Presumably, this is caused by an overbearin…
-
I bought a "ESP32 Audio Kit v2.2 2957" and installed the toolchain as described in this readly, and the ADF (+IDF) from this repo.
I can compile and flash all examples I tried so far (here, e.g. ESP3…
-
Hello @mike4192,
A really big thank you for sharing this amazing project. I decided to implement it on a RPI4 running Ubuntu 20.04 and ROS Noetic. I used the MG996R servos, your exact same LCD, same …
-
when ext_pwr comes back online the oled is not re-initialized and stays blank. this is particularly noticeable when coming out of sleep
the below was provided by @Nicell as a hack to work around th…