-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
I'm currently working on a project that makes use of the RA8875 controller and LVGL on an Arduino DUE (SAM3X8E).
It was mentioned in #39 by @makermelissa that it's possible to use this library for …
-
I am using a chip board and I followed these instructions [https://bbs.nextthing.co/t/spi-support-on-chip-pro/15150/38](url) to increase the size of spi buffer from 4096 to 16384. I ran my code and go…
-
`I've tested the LoRaWANTestOTAA.ino in this repo. Also, I created a new SPI following this tutorial: https://learn.adafruit.com/using-atsamd21-sercom-to-add-more-spi-i2c-serial-ports/creating-a-new-s…
k8zxc updated
4 years ago
-
Hello everyone
I am making a personal version of the hardware for Openlrs, but the SPI interface definition is different from any of the "hardware.h"
So I am having trouble modifying…
-
```
hello guys...
I have a question about firewall...
the PPE supports basic firewall function..
- DDoS avoidance by rate limiting
- Supports stateful packet filtering (SPI)
so, Padavan's firewall …
-
Hello,
Please could I draw your attention to this....
https://forum.openwrt.org/viewtopic.php?pid=340998
I'm not sure if it is a u-boot issue or not...
Many Thanks!
-
## Suggestion
Add SPI Flash chip to CI Test shiled
## Reason
Most deployments will use SPI Flash, not SD Cards. It makes sense to add a SPI Flash chip to the next version of the CI Test shield.
…
-
Hi,
I am planning to use this driver but I wants to perform pin configuration via device tree and not via this utility as configuration may get change based on hardware.
The best way to do this is I…
-
```
In the procedure
static int16_t ucg_com_arduino_generic_SW_SPI(ucg_t *ucg, int16_t msg, uint16_t
arg, uint8_t *data)
the call to
ucg_com_arduino_init_shift_out(ucg->pin_list[UCG_PIN_SDA],
…