-
I'm using an STM32F407VGT6 on an STM32F4DISCOVERY board, running at 168 MHz, with an ADC in IT mode using the HAL libraries (STM32CubeM4 `master` 2f3b26f16559f7).
Calling `HAL_ADC_Start_IT(&hadc1)`…
-
https://github.com/STMicroelectronics/stm32g4xx_hal_driver/blob/19bed7c9f84aa74aba98c6d1ea54bed39bd8e61a/Inc/stm32g4xx_hal_fdcan.h#L212
The struct member DataLength (found in multiple structs) has …
-
**Describe the bug**
Compiling error with Blackpill in Both Arduino and Platformio:
I tried Uploading the code into my STM board, but I couldn't do it, because I got an error on line 3630, on
uC…
-
Hi Guys,
To replicate:
Use STM32CubeIde (1.12.0) to generate a new project for this board and leave everything as default, generate the code and run it.
We have host usb and the call to MX_USB_…
-
This issue is for gathering resources on writing USB firmware in Rust and for tracking progress on building a generic USB stack in Rust.
This is basically a place where people working on USB firmwa…
-
A turtorial would be nice and also a howto to compile this code or a precompiled firmware download link with tutorial howto flash.
-
In the file stm32f303xc.h,
the constant ADC12_CSR_ADRDY_OVR_SLV_Pos, ADC12_CSR_ADRDY_OVR_SLV_Msk and ADC12_CSR_ADRDY_OVR_SLV are defined twice.
Moreover, the equivalent constant for ADC34 are no…
-
[VER:1.1f.20240404:]
[OPT:VNMSL,100,1024,3,0]
[AXS:3:XYZ]
[NEWOPT:ENUMS,RT+,ES,SED]
[FIRMWARE:grblHAL]
[SIGNALS:HSEP]
[NVS STORAGE:*FLASH]
[FREE MEMORY:95K]
[DRIVER:STM32F411]
[DRIVER VERSION…
-
**Describe the bug**
I can't flash an esp32-c3 with probe-rs 0.22.0 (and `--features cli,ftdi`) on 2 different setups. I'm not sure if this is the same issue or not.
**To Reproduce, case 1**
…
-
HI there,
I'm facing a problem with "bluepill (STM32F103C8T6)" to run "240x240 ST7789" Display. As recommended I used "Setup32_ILI9341_STM32F103" and modified this by removing
```
#define ILI9341_D…