-
(see also https://github.com/raspberrypi/linux/issues/1342 )
I've also got that problem with wifi dying.
```
Mar 17 18:25:28 hassass kernel: [10279.186321] brcmfmac: brcmf_sdio_hostmail: Unknow…
ghost updated
2 years ago
-
I suppose this could be considered both a question and a request for documentation enhancement.
When JSerialComm is used with something like a USB-UART bridge (like the cp210x), is a call to `setDT…
-
I recently tried to update humility and as trying to build it. It failed linking the final binary due to undefined symbols. This was recently cited as being due to having older versions of libusb-0.1-…
-
I don't know if this is a bug, but the point is that Memtest86+ 7.00 does not judge the chips as faulty. It does not show any errors.
![IMG_4429](https://github.com/memtest86plus/memtest86plus/asse…
-
### Describe the bug
The Fire Stick 4K Max (2023) has higher than expected latency given the hardware specs compared to the last generation (2021).
I observed the following benchmarks:
- 4K60 50M…
-
Hi @atc1441,
First I'd like to thank you for the impressive work that you've done reverse engineering the flashing protocol and giving us mortals the possibility to flash custom firmware via OTA :)…
-
Heya!
Bought a LSC Smart Outdoor (IP) Camera yesterday and tried this hack, but sadly it didn't seem to work. I added the camera to Tuya and had to update it before being able to use it (which prob…
-
Doesn't show temperature while heating up. But works when print starts.
Just discovered doesn't show layer while printing also.
-
all three marlin tango revisions seem to be the same 1.1.8 and seem to be setup for a delta.. i'm fairly new to marlin, and i am trying to get my new board running on a cartesian, and currently i am g…
-
After flashing the precompiled OpenIPC Firmware via preinstalled U-Boot/TFTP, the camera was bricked. I Got only spaces on UART, so i try the burn-Utility.
But it failed on the precompiled-uBoot bi…