-
It is sometimes useful to have a board-specific routine that can set the MAC address of a network interface. In our use-case it is for a board by Dresden Electronic that comes with a unique MAC for it…
-
Hallo,
Version V 3.5.0-dev+20201221 SIGNALduino cc1101 (chip CC1101) - compiled at May 8 2021 18:53:43
ich experimentiere gerade mit der Bresser 5in1 (FSK!) Wetterstation bzw. mache eine eigene…
-
_From [andre.knoerig@gmail.com](https://code.google.com/u/andre.knoerig@gmail.com/) on May 11, 2013 10:58:33_
Some parts have some of their layers not correctly rotated/flipped when moving to the bot…
-
Thank you for opening an issue on an Adafruit Arduino library repository. To
improve the speed of resolution please review the following guidelines and
common troubleshooting steps below before cre…
-
I started playing with the Event System to decode manchester coded input. I configured the Manchester coded input pin as Event generator, and TCB0 as Event user. The timer is configured to raise an in…
-
For integration with other tools that uses avr-gcc and Avrdude (Like Arduino IDE and PlatformIO) would be great if pyupdi supported the same target names as avr-gcc and Avrdude uses.
In other words…
-
It would be more convenient for may users to upload code over USB without requiring BOOTSEL & UF2 file.
This is provided on Pico with uPthon / Thonny. Other MCU boards allow such a method.
SWD pr…
-
### Basic Infos
- [x] This issue complies with the [issue POLICY doc](https://github.com/esp8266/Arduino/blob/master/POLICY.md).
- [x] I have read the documentation at [readthedocs](https://arduin…
-
Can you guide me how to make this bot real?
I want to make same bot in real world for practical purposes, using only encoders for wheels.
-
Hello! I just got a couple of SmartResponse XE devices and I was trying to flash the bootloader. I have the USBASP and all wiring but I am unable to make de Avrdude command to work
`/bin/avrdude -C…