-
## Environment
- Development Kit: TinyS2
- Module or chip used: ESP32-S2FNR2
- IDF version: v4.4-dev-3401-gb86fe0c66c
- Build System: idf.py
- Compiler version : xtensa-esp32-elf-gcc (cro…
-
Hello,
I tried to use an external barometer, a BMP280 on my mamba f405 mk2 so I ha ve for target the FURYF4OSD, but my baro is not detect by the board.
I tried on betaflight 4.2 (need a custom u…
-
Hello,
My Quad (description below) flies well in ANGLE mode, flies reasonably well in ALTHOLD (with small variations of up to 1 meter in altitude, acceptable), but in POSHOLD mode it oscillates at …
-
### PROBLEM DESCRIPTION
_I tried to connect a CO2 sensor(MH-Z19E) and a PM2.5 sensor(PMSA003) on my [ESP32-C3](https://de.aliexpress.com/item/1005003348936965.html). The issue I'm facing is that,…
-
Projects sometimes get very crowded. I have a mandatory :) touchscreen that overlaps both the BMP280 I2C addresses. The solution would be (1) to place a physical multiplexer (but it's quite nonsense, …
-
**Operating environment/Installation (Hass.io/Docker/pip/etc.):**
**ESP (ESP32/ESP8266, Board/Sonoff):**
D1 Mini.
**ESPHome version (latest production, beta, dev branch)**
v1.15.2
**…
-
### Describe the bug
My FC freezes shortly after power up, using the latest configurator and the latest development release of BF4.3, applied custom defaults and calibrated the accelerometer and then…
-
Hello there,
I have edited original Bosch Sensortec driver for BME280 (BMP280 is available in your projects).
**And I would like to upload it there but I don't know how, I am not good with branches …
-
ie the M5Stack has so many frozen and nested modules that stubber runs out of memory , and needs 2 runs to complete all
possible solutions:
- save list on disk and use soft-reboot to free memo…
-
### Describe the bug
I've flashed the latest available firmware (4.2.11) for the MATEK-H743 (using a MATEK H743-Slim) and tried setting it up. The baro is however no longer available, but it was ther…