-
### The problem
hello,
my esp 32 does not send any data with temperature from 5AM and i have to manualy restart it every morning.
this is my config:
```yaml
esphome:
name: teplomer-bazen
…
-
Hello,
Thanks for your work and great module! I wonder if your module is compatible with RpiGpioSetup created by kwindrem. I'm talking about this one: https://github.com/kwindrem/RpiGpioSetup.
I…
-
### The problem
It seems that in the past shelly only supported 3 temperature sensors. In the add-on manual it now shows 5 sensors. I connected 5 DS18B20 sensors and the shelly shows them all. Unfort…
-
### Answers checklist.
- [X] I have read the [Rainmaker documentation](https://rainmaker.espressif.com/docs/get-started.html) and the issue is not addressed there.
- [X] I have updated my IDF branch …
-
I'm still testing but may I found a workaround, to make PWM PID happen. The trick is to set the temperature higher or lower than the actual value to trigger the hysteresis.
Here is how I did it in …
-
### CircuitPython version
```python
1) Adafruit CircuitPython 9.0.5 on 2024-05-22; Waveshare ESP32-S3-Zero with ESP32S3
2) Adafruit CircuitPython 9.1.0-beta.3 on 2024-05-22; Waveshare ESP32-S3-Ze…
-
Hello,
I use owfs to controll a few modules with ds2408 in them. I wrote a python script to read the PIO.ALL and send it to mqtt. When a mqtt arrives it writes to the corresponding PIO.X (0-7). Tha…
-
Hello,
I flashed my motion sensor and after the reboot, led are turned on for some seconds. But no movement seems to be detected because the blue leds stay off and I receive no event in ESPHome Das…
-
### The problem
My ESPHome (ESP32) was working fine with 9 DS18B20 Sensors for 12 hr. Then the connnection failed and the ESPHome find no Sensors anymore.
Firmware of ESPHome ist 2023.7.1
I don´t k…
-
Hello,
I bought the optional temperature sensor DS18B20, unfortunately it does not display any values on the e-paper. I tested the sensor on another Arduino and it worked fine (with 3.3V and 5V). I…