-
**Home Assistant release with the issue:** N/A
**Last working Home Assistant release (if known):** N/A
**Operating environment (Hass.io/Docker/Windows/etc.):** Documentation Website
…
-
Hello,
I wanted to ask whether you guys are also planning to support other Roombas than just the 980?
The Wifi enabled 600 series (currently on a firmware 3.x) would also be interesting to suppo…
-
Hey all! I've noticed some worrying drift in the pose readings, and so I dug into the odometry code. One thing I'm a little confused about: libcreate [defines the Create 2's wheel diameter as 78 mm](h…
-
Hi,
I would ask to implement a new type of device type compatibile with roomba irobot to implement these features:
- schedule start to clean in the time (not all roomba robot have it)
- know stat…
-
I am attempting to use dorita980 on a Raspberry Pi3 with a group of i7s'. I don't have an internet connection or a way to use the roomba app to initially set up a network for it to attach to. So I co…
-
The configuration generated by the Dockerfile seems to have a typo in it.
[This line](https://github.com/whatever4711/picapport/blob/master/Dockerfile#L25) has `irobot.root.0.path=/srv/photos` instea…
-
Hello,
when installing the irobot library I get an error :
wget https://github.com/danimaciasperea/irobot/archive/irobot-1.0.0.tar.gz -P /tmp/irobot/
--2019-01-17 21:29:37-- https://github.co…
-
Does 28.2 also need drivers? Are these specific drivers "safe" to install for 28.2, or are they only good for 28.1?
-
* Before opening a new issue, we wanted to provide you with some useful suggestions (Click "Preview" above for a better view):
* Consider checking out SDK [examples](https://github.com/IntelRea…
-
I am getting the following warning while running my backup:
WARNING:b2sdk.sync.report:could not output the following line with encoding None on stdout due to 'ascii' codec can't encode character u'…