-
Dear all,
ESP32-S2 and ESP32-S3 have two user SPIs, namely FSPI and HSPI.
I'm using the first one by adding
`#define FASTLED_ESP32_SPI_BUS FSPI`
But now I want to connect a second strip and …
-
Hello @isra17
I see the tools have a Wled simulator, I am trying to run the application.. but it's not running. looks like I need a mapping file, Can you help me in running the tools?
Bhimesh
-
```
What steps will reproduce the problem?
1.Installed Prismatik 5.11.0
2.Run Prismatik
3.Run Configuration Wizard
What is the expected output? What do you see instead?
Expected Output: The Leds to w…
-
Hi, this looks useful to me. Thanks for putting it up here, just in time! Just curious about how to tweak it for our setup. I see you have 53x1 in your settings.xml Is that the only thing I'd need to …
-
Zephyr has a LED driver https://github.com/zephyrproject-rtos/zephyr/blob/main/drivers/led/led_gpio.c which is suitable for single LEDs. There is however (IMHO) no good way to handle RGB leds.
**De…
-
Hi,
Referencing your power consumption chart [here](https://github.com/thehookup/Holiday_LEDs_2.0/blob/master/Strip%20Wattage.pdf), I am getting drastically different results.
**Test**
- WS2812…
-
Hi, i tried the project.
Did the PCB's at pcbway, and started the project.
I just wanted the classic, potentiometer RGB controller.
First try, put the program with effects on the arduino.
After st…
-
Hallo zusammen,
erstmal vielen Dank für das tolle Wortuhr-Projekt.
Ich baue auch gerade eine Wortuhr im Format 1 x 1 m. Für die Beleuchtung der einzelnen Buchstuben (außer den Minuten) verwende ich …
-
I built a 4 LED Module and wired it to an arduino nano according to https://create.arduino.cc/projecthub/laserbrain/arduino-controlled-artificial-candle-lights-65a46d.
I tested the module with a modi…
-
This is a reference issue to picture the house and list its dimensions.
I marked approximate desired location of the leds.
It's 73cm wide, 120cm tall, and 34cm deep (w/o basement). Basement is …