-
Hey,
I recently purchased NVEM v5 with hopes of getting it to work with LinuxCNC via Remora. But after spending whole day going through LinuxCNC forum, trying every combination of hardware and soft…
-
Instructions say that running "make" is all that should be needed if LinuxCNC is compiled from source. Since 2.9 is available in the apt repo as linuxcnc-uspace-dev compiling from source isn't what mo…
-
## Here are the steps I follow to reproduce the issue:
1. in ini file i had setting the home all have sequence, and the limit sensor also use for home
2. home all, and when have axis in limit then…
-
In the law of unintended consequences, the new probe protection plugin is not compatible with the IOSender probing macros.
As an example:
```
G38.3F100X10
!G0X-0.5
G38.3F25X2
```
Above probes…
-
### Machine Context
Building Embroidery machine that needs M266 to wait for needle up sensor before next move
### Feature Description
the m266 wait for input trigger will permit the next move to ha…
-
When starting gmoccapy with
```
LINEAR_UNITS = inch
```
and
```
RS274NGC_STARTUP_CODE = G20
```
the DRO in gremlin shows mm. Switching to G21 and then back to G20 makes the correct unit in t…
hansu updated
10 months ago
-
## Here are the steps I follow to reproduce the issue:
1. Install Master on Debian 12
2. Start the Axis Sim
## This is what I expected to happen:
Axis to run
## This is what happened inst…
-
log
```
Starting LinuxCNC...
Starting LinuxCNC server program: linuxcncsvr
Loading Real Time OS, RTAPI, and HAL_LIB modules
Starting LinuxCNC IO program: io
Starting HAL User Interface program…
-
## Here are the steps I follow to reproduce the issue:
1. Install Fedora IOT 37 and following [this link](https://copr.fedorainfracloud.org/coprs/dwrobel/linuxcnc/)
## This is what I expected t…
-
It seems on a directional change my indicator moves only about 1/4 the value of what it should.
EXAMPLE:
If I move 0.254mm left and right it will miss 0.00254mm but if i keep advancing and not chang…