-
Meadow OS 1.0.0
When an InterruptPort is disposed in managed code, Core attempts to disconnect the interrupt handler. This calls an ioctl to configure the interrupt as disabled (enable == 0) and w…
-
This is relevant for the low-end Cortex-M CPUs that only support Thumb2 code. They simply can't run ARM32 machine code.
Even though mobile ARM CPUs are going the ARM64 route (which explicitly include…
-
https://github.com/bytecodealliance/wasm-micro-runtime/actions/workflows/spec_test_on_nuttx.yml
```
expected: 'SystemExit(1)'
got: 'iwasm --heap-size=0 -v=0 --repl /tmp/tmplr32ph0k.aot
AOT m…
-
Hi,
While compiling Nuttx the following error was triggered:
```
common/xtensa_windowspill.S:153:15: error: expected immediate in range [0, 15]
srli a3, a3, 32-(64 / 4)
```
In 8.3.307, [the…
-
If you deselect an app using` make menuconfig `the build always fails, even if you do a `make clean` and a `make apps_clean.`
The only solution is a `make distclean` which doesn't seem right to me?…
-
No output on the pin with this on a v2 board (tested `D02` and `D06`)
```
var pwm = Device.CreatePwmPort(Device.Pins.D06, 100, 0.5f);
pwm.Start();
```
Same works fine on a v1d board. Yes, th…
-
- Hardware description: Jetson Nano
- OS: We are running the foxy docker image for Jetson
- Installation type: cmake
- Version or commit hash: v2.3.0
We are running the Agent on the Jetson N…
-
I want to develop an application with RFID , however it seems RFID is not compatible with spresense (Arduino IDE ,I mean there is no specific library). I would like to know if its possible to integra…
-
Although it's related to an app, this issue has been raised after PRs #7202 and #9737.
Both `nuttx/boards/risc-v/esp32c3/esp32c3-devkit/configs/module/defconfig` and `nuttx/boards/xtensa/esp32/esp3…
-
An application `Make.defs` can define multiple builtin applications by using something like:
```Makefile
MAINCSRCS = a.c b.c
PROGNAME = a b
```
When building `a.c` the `-Dmain=a_main` will be d…