-
How about implementing a midi in/output to v.02. An optocouppler and some resistors and a diode should do the job.
would open up a lot of control possibilties.
-
Bin file uploaded successfully, but after restart led doesn't blink and module not respond to AT commands. Also reflash with and without resistors doesn't help
-
in the version 1.2 you dont use the 5k1 resistors , that means you bring the cc1 and cc2 to ground . the usb c to usb c charger will istil work ?
-
We need some more textures and models for development.
Models (and textures to go with them):
- [ ] Resistor
- [ ] Diode (same model as resistor)
- [ ] Capacitor (Ceramic)
- [ ] Capacitor (Elec…
-
Issues:
I got some longer wire, but the inside of the wire is just lots of smaller wires which did not surprise me. How do I get it to stay in my breadboard?
I got a soldering iron and now I fee…
-
[![image](https://user-images.githubusercontent.com/20149493/94636180-afc24980-02d4-11eb-8136-555254843b5f.png)](https://youtu.be/sNIMCdVOHOM)
https://youtu.be/sNIMCdVOHOM
1x ATMEGA328P chip with …
-
Sorry to put this here, but not sure who else to ask. I soldered some headers onto the spots marked as USB on the stock AD5M motherboard, and no matter what I try to hook up to them they don't seem to…
-
The Wires game is missing from the external apps.
https://github.com/AlexTaran/flipperzero/tree/master/games/connect_wires
-
Hello,
are there any plans to add compatibility with the family of boards based on the RP2040 (with the arduino-pico core)?
I am using a custom board with a RP2040 and have the Sensor (variant TLE…
-
This issue was observed in dev.52 but occurs in testing in dev.48 using `?vertexDisplay`
The following steps (also shown in the video) reliably reproduce this issue for me using chrome on Windows 1…