-
In pursuit of maximum power savings I noticed that Adafruit is not using the onboard SAMD51 Buck regulator despite the inclusion of an inductor onboard. Is there any reason for this?
On my own custom…
-
Please make sure that 'Store Past Broadcasts' is enabled on your channel so that we can review examples of your coding stream.
**What is the URL for your Twitch channel?**
https://twitch.tv/dougla…
-
What commands should I send to SAMD51 using WebUSB API to flash firmware using chrome just like Makecode ?
-
Samd51 has a special reserved are with calibration values, its address is 0x00800080.
> The NVM Software Calibration Area contains calibration data that are determined and written during production…
-
leftover debugging clock output?
https://github.com/Microsoft/uf2-samd21/issues/43 from @MartinL1:
> Shouldn't the lines 8 and 9 in the "init_samd51.c" file be commented out?
>
> ```
> // Ou…
-
I recently recieved my BIQU SKR 1.3 mainboard. I have started to configure it in VSCode, on Mac, but tried Atom, and both also on a Windows VM. Steps to reproduce: Download marlin, click build in Plat…
-
Hi !
I'm trying without success to get my nRF24L01+ module to work.
I'm using an Adafruit Grand Central board equipped with an ATSAMD51P20 running at 120Mhz.
I've another Arduino Micro sending …
-
I'm attempting to use the Grand Central M4 as a replacement for the MEGA 2560/RAMPS combination.
Per instructions on the Klipper FW project, which supports the SAMD51 chipsets, I configured Klipper…
-
Samd51 has a special reserved are with calibration values, its address is 0x00800080.
> The NVM Software Calibration Area contains calibration data that are determined and written during production…
-
Hi,
I did a simple loop test in python to compare with my STM32F4 based MicroPython board and the results are quite unexpected. CircuitPython 4.x is **16x** slower than MicroPython for an equivalen…
shazz updated
4 years ago