-
For robots that lack ethernet (TCP/IP) networking support.
Especially older robots often don't support socket comms, even if they have a network interface. Using serial ports can then be a good alter…
-
I've installed marauder software on FliiperZero wifi board via OTA. Unfotunately I cannot send anything to board. I've tried with custom FlipperOS https://github.com/RogueMaster/flipperzero-firmware-w…
-
This is quite likely user error here so I'll be explicit about what I'm doing outside of getting the sample app to build and connect to my network.
I do not have a Philips bridge of any type nor a…
-
```
What steps will reproduce the problem?
1.Power on AP2
2.Set SERIAL3_BAUD and SR3_PARAMS
3.monitor UART2 pins (long side of board or UART0/2 if soldered)
What is the expected output? Data What do…
-
Hello! Thank you for such great open source project!
Jetson AGX Orin
agx-csi-adapter Rev 1.0.0 7/2022
sdi-mipi-bridge Rev 1.3.0 02/2021
We have integrated drivers code from sdi-mipi-bridge rep…
-
Bulbs are not showing on eve app or controller app it only finds the homebridge but no accessories
-
```
What steps will reproduce the problem?
1.Power on AP2
2.Set SERIAL3_BAUD and SR3_PARAMS
3.monitor UART2 pins (long side of board or UART0/2 if soldered)
What is the expected output? Data What do…
-
I followed @meefik's instructions (on his blog) to set up GNOME and Cinnamon. Connecting to VNC simply returns a grey screen with an X cursor. Trying to start the desktop session from the terminal ret…
-
Aqara roller shade companion E1 device stops working. It was working at least during 3 days and now without doing anything it reports errors and also happens again at least 2 times more. I use sonoff …
-
**Describe the bug**
I am unable to boot a Raspberry Pi 5 from an external NVMe SSD if used behind a PCIe switch (e.g. not as the root device on the external connection).
**To reproduce**
1…