-
Hello,
I have added the Btrfs driver from this repository to my motherboard's UEFI using UEFI Tool and flashrom, and have been using it to boot Arch Linux from my SSD without a partition scheme (fo…
ghost updated
4 years ago
-
As stated in https://github.com/quattor/template-library-core/issues/152, a UEFI boot partition should have both `boot` and `esp` flags to be label-type independent. Template library should be updated…
-
Hi,
My hardware settings are as follows:
UEFI BIOS Version: N1FHT73W(1.47)
UEFI BIOS Date :2020-07-01
Embedded Controller Version :N1FHT3W(1.18)
CPU Type: i7-6500U
OS: Catalina 10.15.7
Issues…
-
I am not quite sure what I have done to the VHDs but I have two zorin legacy-installed VHDs which show the same problem.
They were legacy booting OK previously and then I must have done something suc…
-
My most recent build of the pancsf-midstream kernel goes into a bootloop when loaded by UEFI, using the same DTB and boot options that work well with the stock u-boot.
The cause of the bootloop is …
-
Hi,
I recently installed Windows on my Raspberry Pi 5 with the official case, but the fan in the case is always running at max speed. Is there any way to fix this issue without replacing the fan?
i13k updated
3 months ago
-
hi, is there a way to diagnose pc problems over the network. i get that it is not the objective of hardinfo. motivation is to tell remote user to connect with just a working network and bios.
-
I've been trying the UEFI DBVM debugger recently
Is there any problem with DBVM debugger without turning off specter in the registry?
Also UEFI DBVM requires a handle
obregister callbakcs -> …
-
`pulumi v1.10.0` `pulumi-gcp v2.2.0`
Repro:
1. create instance and instance group containing that instance
2. make a change that requires instance to be replaced & apply it
Expected:
replacem…
-
We use Dnsmasq to replay the network boot service (PXE and uEFI network boot), for PXE, the pxelinux.0 works. However, with uEFI, if the secure boot is enabled, it fails. This is due to this issue:
h…