-
It is reported that the ```/sys/bus/usb-serial/devices/ttyUSB0/latency_timer``` became 16 after Linux Kernel 4.10, which causes big latency while using usb-serial. This also significantly influences t…
-
According to the documentation, on Windows the cable needs to present a COM port and is addressed as such, whereas on Unix-like OSes (Linux and Mac) only FTDI adapters are supported (as far as I under…
-
I assume that this is a custom firmware with BT (and usb) audio + serial.
A very useful combo.
Its [datasheet](https://nettips.ru/book/BT201%20Module%20_KT1025A_B_User%20Manual%20_V2.3.pdf) has so…
-
After #5 is done we will need this for manual testing good cases and high-level functionality.
It should include the following functionality:
- Send frame of data and read response
- Run indivi…
-
I have a standard PHP program that uses Javascript running on a Windows 10 Pc. I want to get serial device (Ohaus scale) data and send requests to the scale. I have seen a lot of discussions about v…
-
On macOS, the system creates the following, as well as `/dev/tty.*` with the same suffixes. I've added what I think these map to:
```
USB Quad_Serial
/dev/cu.usbmodem01234567891 -- MEATPI-UARTA…
rgov updated
5 months ago
-
**Describe the bug**
```
>>> gphoto2 --capture-image
*** Error ***
An error occurred in the io-library ('I/O problem'): No error description available
ERROR: Could not capture image.
ERROR: …
-
On the upduino v2 with ice40 up5k and an FTDI 232H chip, the device enumerates as a serial device and creates `/dev/ttyUSB0`. I can send/receive data from the board fine:
```
[1455866.817013] usb…
-
- Windows 11 64 bits
- M2 nano and M3 nano controller.
- LaserGRBL version 6.1.0 and 6.2.0.
**Describe the bug**
A clear and concise description of what the bug is.
Impossible connection with the…
-
#### Description
connecting a dev board to a computer and be able to configure the app via javascript (nodejs or website) is very attractive to beginners. I am not sure if it is technically possible …