-
[log.txt](https://github.com/Koenkk/zigbee2mqtt/files/10357046/log.txt)
### What happened?
9 devices just dropped off the network. Nothing has changed in my setup except the new upgrade of z2m.
…
-
### SOLVED: The problem was a RX track cut just where it joins the pad. I was very careful when soldering. Used a very thin wire and smd solder iron, but it seems a defect on the track itself. **Worth…
-
@grobasoz @MattWestb Any throughs on this? -> https://github.com/zigpy/zigpy/discussions/1042
Hedda updated
2 years ago
-
# !!!! Important !!!!
For general assistance using this project please review the [Q&A Discussion](https://github.com/tsightler/ring-mqtt/discussions/categories/q-a) group and, if your question is un…
-
Hi there,
I am trying to convert ESP-ECU-9_6/CC25xxfirmware ds3/CC2530ZNP-with-SBL.hex to a bin to flash to a regular 2530 board, using ccloader on a D1.
Using the instructions on https://zigb…
-
Hello,
I tried to install your plugin on a fresh HA 2022.11.1 container, with a mapping to a homeduino device on a USB port:
devices:
- "/dev/serial/by-id/usb-1a86_USB2.0-Serial-if00-p…
-
### The problem
Been seeing false motion alerts from couple devices from two different manufactures when all individuals are away from home.
This happened while back and though it was the sensors …
-
### The problem
For some reason a massive negative(!) “production” bar appeared on my energy dashboard:
![](https://community-assets.home-assistant.io/original/4X/3/9/1/391db9c6720891c1a499551fc…
-
**Describe the bug**
I am using cc2530 with pzem-004t v3 with PTVO configurable firmware in the home assistant using this custom quirk
[pzem004t.py.txt](https://github.com/zigpy/zha-device-handle…
-
### Description of the issue
Hi,,
i have a zigbee sensor (lixee) on my electric board and solar panels for my personnal consumption.
when solar panels have a higher value in VA between my consump…