-
When testing at the launch, on occasion when holding up the board, the reported altitude by the ground station was that in the hundreds of feet (obviously inaccurate). Replicate and then determine the…
-
Been able to disable the speaker, would be nice.
-
I'm trying to get APRSdroid working with my nucleoTNC, and I've done so in the past with a different phone, but I'm currently using a pixel 5 running android 14.
The app crashes immediately upon a…
-
I would like to request the APLFG? TOCALL for my LoRa APRS weather station project.
tocall: APLFG?
vendor: Gabor, HG3FUG
model: LoRa WX station
class: wx
os: embedded
contact: hg3fug@fazi.hu
…
-
With Tristen's new Motorola Quantro repeater at 350 watts delivered Sunday September 17, 2023 to moos, we now need the duplexor from St. Paul campus moved and hooked up at Moos in Minneapolis.
Pickup…
-
Here is the code in my program where I'm constructing and sending a message packet.
`def send_aprs(msg):
try:
recipient = str(send_to.ljust(9))
logger.info(
f"Forw…
-
Extracto del README.md
1 = RX iGate, black "L" as symbol
2 = Rx + TX iGate, red "L" as symbol, HAM only. RX will be sent to APRS-IS, Messages will be sent via Lora. Same frequency for RX and TX. B…
EA2CW updated
7 months ago
-
https://github.com/f4exb/sdrangel/blob/8f33bad363bed4579e073d2554b0f5884f81f25e/sdrbase/util/ax25.cpp#L74
The "via" path decoder ignores the MSB in the last octet, and does not append a '*' in the …
hessu updated
7 months ago
-
Dear all,
after a reflash to factory firmware the Wifi is no longer working. Tried to flash again the APRS-firmware, Display shows Wifi on, but will not connect to an existing network or will not p…
-
Any chance to add support for this board:
it's Wireless Tracker kit based on ESP32…