-
CNCjs is detecting errors in lines of g code where there does not seem to be an error. The lines of code are as follows:
G2 Y50.6825 Z-0.25 I0.3175
G2 Y30.6825 Z-0.25 I0.3175
G2 Y10.6825 Z-0.25 I0…
-
everything was fine, print lifted from bed and looks like a bunch of plastic blobbed around nozzle, now I have no power coming from the P2.7-E1 port on the board?
I guess I could move to E-2 P2,6 but…
-
### Issue description
i cant compile my Sketch,
when i compile with "#define Z_TWO_STEPPER" no problem but
when i try to compile with "#define Z_THREE_STEPPER"
i get this Compile ERROR
##…
wext1 updated
6 years ago
-
After change to the version 4.3.5 i get at start a message "Need Tune PID"
even though I set the right PID in the configuration_temperature.h.
And I set PID for the heater and bed and this worked …
-
As I recall it, V5 of the planner intended to include functionality to carry your character forward from life to life. I was wondering if it would be possible to incorporate a small subset of that in…
-
Scenario:
(1) LW latest version running on OSX or Linux (Ubuntu)
(2) Emblaser 2 using either ESP8266 websocket, or telnet (same situation for both connection types) - Note I have implemented telnet …
-
Update: 2018-10-17
This issue has maxed out the number of comment that can be added to a github issue. We have created a new issue #258 where you can request to be added for access to the wiki.
…
-
Migrated from [rt.perl.org#132901](https://rt-archive.perl.org/perl5/Ticket/Display.html?id=132901) (status was 'resolved')
Searchable as RT132901$
p5pRT updated
6 years ago
-
I'm writing a GUI for Grbl in C with GTK+3.0 on Linux. It is a simpler interface than other GUIs because our work is 2D with modest Z demands (large art drawings on a plotter). I'm using a serial port…
-
Adding a custom axe to a character and setting the physical damage range to 1-1 will produce a value of 10-13 weapon damage in the right side. A completely new level 70 profile has 217 mainstat. My ex…