-
Using iNav 1.6.0 on an Seriously Pro Racing F3 Delux board with a (properly reconfigured) "Walkera QR X350 Pro Quadcopter - GPS Module", will not arm, even after GPS fix is obtained, even after waitin…
-
If I choose these two options together on CC3D the board stops working. It blinks four times on startup and that's it. USB is not recognized. Reflashing helps but once I select these two options toget…
-
Hi guys.
Today I received my first Naze32 rev6 board, but I have a HUGE issue: I can't set a correct Channel Map because just Aux channels works (1 to 4). No Roll, no Pitch, no Yaw and no Throttle.
I…
-
Would it be possible to add support for Lisa/M and Lia (Quadshot mocha) flight controllers? they are both STM32 based. this would give cleanflight VTOL capability.
-
dys xm20a, spracing f3, luxfloat, 1khz, 100hz lpf, motors randomly twitches
[blackbox_log_2016-05-17_165313.TXT](https://github.com/cleanflight/cleanflight/files/269411/blackbox_log_2016-05-17_165313.…
-
While upgrading from baseflight I noticed that the variable power_adc_channel is not present. This is used in baseflight to move the current sensor input to one of the RC inputs that isn't in use.
At …
-
Hi! I don't know if this is an "issue". If not, please don't hesitate to close this.
I think that now that Cleanflight is based in betaflight, some FC have loose functionalities, like GPS or iBus T…
-
I Guys,
I need some helpto solve a wired problem with cleanflight.
My backup and restore button has disappeared.
You can find a picture attached.
If anybody has seen it could you please tell me wh…
-
My setup - esc's on motor 1,2,3,4 gimbal servo on motor 5 output, sbus rx and uart2 drives osd.
If you enable the servo tilt function motors is shifted( but I think they should not in 3.1.7) and if y…
-
We can do this now #763 is fixed.
1. Update build system
2. Update docs
hydra updated
7 years ago