-
Currently POPSICL - Probing Over the Physics' Institutions Systematic Cooling Liability
POPISCL is hilarious.
But it could be.... Probing Over the Physics Systematic Ice Cold Liability. Let's f…
-
I have noted that many ppl show broken 3D printed parts of tourniquet. Reason for that - wrong slicing settings, wrong nozzle dia, low nozzle temperature and high cooling settings. Also wet plastic co…
-
**Is your feature request related to a problem? Please describe.**
printing in vase mode , i have cooling problems on lowered time layer print time.
**Describe the solution you'd like**
PrusaSli…
-
Right now, Slic3r has the option to slow down the feed/flow rates of a layer to extend the layer time to meet a configured threshold. That works for some things, but not always for parts with small h…
-
Extruder cooler is not powering on with DUE, I have RAMPS-FD setup, the fan should run at 30C, but even on 170C nothing happens. Selecting the same pin as board cooling fan is a temporary workaround. …
-
...that works like normal conditioners with one side outside (only cooling or heating without changing temperature in other rooms)
f.e. for underground freezer rooms
If its alredy in the mod i didn'…
-
Use 3-letter country codes according to [ISO-3661-1](https://en.wikipedia.org/wiki/ISO_3166-1_alpha-3)
-
- Detectors are critically important
- TLSE is critically important
- Need to characterize the detector because pointing is so bad
- Si Grisms are a great idea
- IR is tricky due to cooling -> sti…
gully updated
6 years ago
-
https://github.com/Kerbalism/Kerbalism/blob/df311ab026cc67bdd1b8e25652b775c15e225840/GameData/KerbalismConfig/Support/CryoTanks.cfg#L30
Well, all the other Kerbals disapprove. In both real world an…
-
**LG Air Conditioner Model**
MS-Q12SWDZ
**Homekit Model number**
RAC_056905_WW
1. This model has a HC option (high cooling, where in it tries to max out the cooling for a short period to brin…