-
Z-Uno is a Arduino compatible board with built in Z-Wave support, details on the board itself are here:
https://z-uno.z-wave.me/technical/
They currently support the Arduino IDE:
https://z-uno.z-…
-
### Description
The compiling of the OneWire libary with the pre-released ESP32 core version 3.0.0-alpha3 throws an errorwhile compiling the DS18x20_Temperature example.
### Steps To Reprodu…
-
It would be very nice if we could support Shelly HT. Maybe this could be similar to the Power Measuring?
-
**Describe the bug**
How do I have to wire the DS18B20 when using it on a UART connection? When I do it as descibed here: https://www.analog.com/media/en/technical-documentation/data-sheets/ds18b20…
-
When running sudo ./setup.sh I'm getting the following error - fatal error: azure_c_shared_utility/xlogging.h: No such file or directory
I'm guessing the azure_c_shared_utility should be part of the …
-
Hi!
I make firmware with 2 sensors SHT30 and ds18b20
```
Board type: CC2530
Device type: Router
Output pins:
P06: Output 1, Temperature sensor (I2C), Pull-up (Address (dec): 68, Type: SHT30)…
-
I am able to set thermostat temperature according to the example:
https://github.com/sinricpro/python-sdk/blob/master/examples/temperature_sensor.py
But I am not able to set thermostat **mode**. I t…
-
Hello,
I use owfs to controll a few modules with ds2408 in them. I wrote a python script to read the PIO.ALL and send it to mqtt. When a mqtt arrives it writes to the corresponding PIO.X (0-7). Tha…
-
Hello,
I flashed my motion sensor and after the reboot, led are turned on for some seconds. But no movement seems to be detected because the blue leds stay off and I receive no event in ESPHome Das…
-
### What happened?
The WLED restarted after 59 seconds, since the new software 7.50 is on the Fritzbox and it was rebooted once.
I have see this bug still on the Beta Versions from the Router, with …