-
It seems that the current implementation of Spi requires the read and write to be of equal lengths:
https://github.com/embassy-rs/embassy/blob/7e251a25509a02f9388a8352522e1a279ad857b1/embassy-rp/sr…
-
When using `Ethernet DMA` for sending packets, we cannot ensure that we are always able to send the packet by the time of calling the `consume` function:
https://github.com/smoltcp-rs/smoltcp/blob/…
-
`probe-rs` uses the `tracing` crate and we cannot control the logging level when calling `teleprobe` with `RUST_LOG`.
Any tracing information emitted by `probe-rs` is not visible.
-
This issue arises out of the discussion regarding the recent addition of an implementation to support the Semtech sx126x LORA chips:
https://github.com/embassy-rs/embassy/pull/985#discussion_r98356…
-
Currently, embassy-lora and embassy-stm32 subghz peripheral uses blocking SPI. They should be changed to use async SPI (and IRQ to detect busy/ready conditions).
-
Evaluate changes for embedded-hal-async 0.2.0-alpha.1.
-
A trace is given below of stm32wl example lora_lorawan.rs, which is expected to fail here because there is no LoRaWAN gateway with which to communicate. However, the trace does show the setup for chi…
-
Hi, its looks like some stm32f103(blue pill) and stm32f(401)/(411) dont properly work under embassy, but works fine under stm cube code generation. I build blinky example from stm32f1 and stm32f4 and …
-
Hey there. I've been trying to connect to a couple wifi routers I have, and most recently to my phone hotspot (Pixel 6, because I can put it right next to the Pico, which gives more consistent results…
-
Useful for generating HALs.
It can be obtained from the NVIC XMLs:
https://github.com/embassy-rs/stm32cube-database/blob/main/mcu/IP/NVIC-STM32F777_Modes.xml#L4