-
Just check now a days feed entries have images/videos/contents can we have few functions to extract that details?
e.g : http://sportbild.bild.de/rss/vw-startseite/vw-startseite-45028186,sort=1,view…
-
Fully lit up areas still spawn mobs in ghost blocks. I have a torch against the actual ghost block and it still spawns mobs within.
Zombies and Creepers walk out of the blocks. During the day, skele…
Xerow updated
6 years ago
-
can you add an eagle cad library for the firebeetle and firebeetle covers
-
Current Mounting is designed for the Index Pick and Place's PEEK array of mounting holes. (M3 at 30x30mm)
However, the current revision of the board will likely fit inside a NEMA17 enclosure. Add a…
-
No Issue but a ***big*** public THANK YOU Willem for this project. It's super helpful, saves tremendous amount of time and works like a charm :)
-
Does anyone know if it is possible to use the REST api to check the current state for a gpio input?
I'm currently using a mechanical switch to detect the end of the filament but I would like to be …
-
## Problem: different results: UI vs. RSS
Found for UI search (18 hits):
https://mediathekviewweb.de/#query=Tod%20von%20Freunden
Respective RSS (6 hits):
https://mediathekviewweb.de/feed?query=T…
-
I'd like to use this with a HC-SR501 Motion Sensor built-in (connected to the Pi 0).Would you consider adding support for that? Both in the software as well as an edited version of the hardware enclos…
-
### Application Version
4.13.1
### Platform
Windows 10
### Printer
Voron 2.4 300mm
### Reproduction steps
Printed a rectangle two layers thick with several round holes near the center
[cura.lo…
-
### Application Version
5.1.0
### Platform
Windows 10 Pro, NVIDIA GeForce GT710
### Printer
Creality CR-10S Pro V2
### Reproduction steps
1. Load STL files into Cura for top and bottom of an en…